Wireless connection validating identity networking wireless
 = If the eduroam network does not show up, click on Refresh network list.The generic settings below will allow you to configure a wireless device to connect to eduroam.Not all the configuration settings will be available on all devices.The network name for the secure wireless network is eduroam. The wireless Network Authentication type is WPA2 Enterprise. If your wireless device does not support WPA2/AES, select WPA authentication and TKIP encryption.If you change your password in the future your wireless connection will prompt you for the new password.
Please refer to the documentation of your vendor's card in order to turn it off as this may interfere with the procedure here documented.You may notice that the “Truman Secure Wireless” network has been found, but due to specific settings needed for a complete connection to the Truman Network this will not allow a proper connection. – A free virus program courtesy of Truman State can be downloaded here.* You will not be prompted for your username and password or to validate the server certificate every time you connect.These are only needed when you first setup the wireless connection.This document will guide you through the process of connecting to the secure wireless network in Windows 7. If you need help setting up your wireless connection you may contact the ITS Helpdesk. Once the wireless tab has opened, select the link marked “Open Network and Sharing Center”. Once the “Network and Sharing Center” windows opens, select the link marked “Set up a new connection or network”. As the “Set Up a New Connection or Network” window pops up select the option marked “Manually connect to a wireless network” and select next. Connection should complete successfully and the wireless icon at the bottom right-hand corner of the screen should show connection status.* Additional installation of Cisco Clean Access and a Anti-Virus Program of your choice will be required before connection can fully complete.- Information on Installing Cisco Clean Access can be found here. For more information about the wireless network, including coverage areas and general information see the Wireless Network Overview. In this window type in your Truman Student ID and then the Password that correlates with this ID (this id and password are also used for campus computers login and Tru View) and select .